Complete TBI Fuel Injection System for your IH

 
Complete TBI Fuel Injection System for your IH
Select Engine Size:
Select Harness Length:
Select TBI Adapter:
Select Distributor:
Project Comments:
  Performance Throttle Body Upgrade - Add $250
  Core Charge on Distributor - $100
Quantity in Basket: None
Part #: AFI-TBI-SYS
Price: $1,598.95
Shipping Weight: 20.00 pounds
Quantity:
Tell a Friend
Throttle Body Fuel Injection or TBI systems are configured in several different forms depending upon your needs, wants, and budget. Available as a fully emissions capable to a basic functional unit. If you are looking for the most economical way to replace that old carburetor, these systems are for you. Provides great starts, drivability, and fuel economy.

AFI uses the highest quality thin wall high temperature wire available today. Their harnesses are built with full protection from the elements using state of the art weatherpak connectors. All harnesses have a very simple 3 wire hook up (battery, ignition and ground) plus EFI items , also includes a power and fuel pump relay.

This system includes a complete TBI conversion plus a custom EFI distributor for complete fuel and spark control. You may also choose to use your own efi distributor which will deduct $395 from the price of this kit. You may also choose to run a "Fuel Only" system which will have no timing control and utilizes your current distributor. Choosing to run your fuel injection system this way will deduct $320 from the base price.


Now included with every kit is an ALDL USB port type data logging cable and data logging program. Makes trouble diagnosis or tuning a breeze.

This is what you will receive with your fuel injection kit:
- Custom built EFI distributor
- Rebuilt TBI unit with Flow Matched Injectors
- ECM (rebuilt and tested GM production)
- Complete wiring harness
- AFI specially calibrated chip
- Adapter plate, gaskets, hardware
- External Electric fuel pump with filter
- Fuel pump relay
- Power relay
- Coolant sensor
- MAP sensor
- O2 sensor
- Check engine indicator
- Installation instructions
- ALDL Data Logging Cable and data logging Program
- Tech support (Visit our Fuel Injection Tech Forum at www.ihonlynorth/forum/fuel-injection/)
- Many miles of low maintenance fuel injection operation

Choose engine size, harness length, distributor connection , adapter plate, and any other project comments(such as cam specs, transmission, axle ratio, etc) when ordering.

Helpful Ordering Tips -

Harness Length - Most Scout 80/800 and Scout II's will work fine with the standard 30" length harness. For Travelall's and Pick-ups we suggest buy the 48" long harness. If you plan on putting the ECM(computer) in a more distant spot than you may want to upgrade to the 96" long harness.

Intake Adapter - If you are buying a kit for an IH 152/196 4cyl engine then you will need a 1bbl adapter. AMC 232/258 6cyl engines will use either a 1bbl or 2bbl adapter depending on which intake manifold that you have. IH 266/304/345/392 and AMC 401 V8 engines will use either a 2bbl adapter or 4bbl squarebore or spreadbore adapter. You need to know which adapter your application will require before ordering.

Distributor Connection - There are several different ways you can go with when it comes to distributors for your fuel injection system. If you want to retain your stock electronic ignition distributor than you will require a tach filter. HEI distributors with the coil in the cap will also require a tach filter unless they are being converted over for fuel injection use. MSD triggers and small body HEI units with external coil can be plugged right into the system. When investing in a fuel injection system it is always best to use a distributor set-up for fuel injection in order to take advantage of both fuel and spark control.

Project Comments - When ordering its best to tell us as much info as possible about your project so we can setup both the chip and harness as close as possible first time out. The things we need to know are - Vehicle, 2 or 4 wheel drive, camshaft specfications, if its air conditioned, transmission, axle ratio, tire size and distributor being used. Also, let us know if you plan on some heavy towing.

Upgrades - When ordering we suggest the performance throttle body upgrade for higher performance IH 392 and AMC 401 V8 applications. The performance throttle body has larger bores and injectors. For stock applications we do not suggest this upgrade.

This item is special order and is drop shipped direct from AFI.
Expedited shipping is not available for this item. Expect 3-5 weeks for delivery time.

NOT CALIFORNIA SMOG LEGAL - FOR OFFROAD USE ONLY

A $100 CORE CHARGE WILL BE ADDED TO YOUR ORDER AND REFUNDED UPON RETURN OF A USABLE DISTRIBUTOR CORE.


Related Item(s)

Product # Name Price Availability  
AFI-TBI-DIY Do-It-Yourself TBI Fuel Injection Kits for your IH $495.00  
FI-ALDL-CABLE Fuel Injection ALDL Cable w/ USB Port $62.95  
IHO2-MDI RPT Aluminum Intake for 266/304 - Squarebore $539.95  

 
 


Scout, Traveler, Terra and Travelall are trademarks of the International Truck & Engine Corporation.
Their use has been licensed under Scout/Light Line Distributors, Inc. -IH Only North is a Scout/Light Line Authorized Dealer.

  IH ONLY NORTH INC: Hundreds of parts in stock and ready to ship. If you don’t see the part you are looking for feel free to call or email us. We have what you need! 916-652-4706  
All materials on this site are copyright IH ONLY NORTH INC, and may be used only with permission.
Site Created By: 4x4 Systems